Omga Model T2006 OPT 6000 CE Push-Feed Optimizing Cut-off Saw
Machine Available
Stock #813844
Used- Omga Model T2006 OPT 6000 CE Push-Feed Optimizing Saw
- The pusher carriage, complete with a camera for detecting chalk marks identifying the defects and a sensor for the length of the board, lifts up pneumatically in order to completely scan the board during its way back to loading position
- Total optimization managing up to 3 different grades
- A vertical pneumatic gripper allows strict tolerances on the cut lengths +/- 0,15 mm (.006")
- Maximum Feed Rate of 240 m/min
- Windows 7 opperating system, is complete and user friendly
- Two clamps on the sides of the saw blade ensure the correct positioning of the material against the fence both during the feeding and during the cutting cycle
- Maximum Width of Cut: 300mm
- Maximum Thickness of Cut: 120mm (4.72") with the optional 500mm blade
- Maximum incoming Length: 6000mm (19'8")
- Saw Blade Motor: 5.5KW (7.37HP)
- Computer is capable of cutting to length, optimization based on length, defecting, optimization between defects, an optimization between defect w/ selection of 3 different grades
- Metric or Imperial Measurements
- Specifications are written to the best of our knowledge with some being sourced from literature, we encourage you to inspect the machine and verify
- Year: 2013