Cefla Window Profile Spray Line

• Cefla Window Profile Spray Line
• Working Speed 30 m/min (98.5 fpm)
• Work Piece Dimensions:
• Min/Max Length: 12" (325mm) / 6'7" (2000mm)
• Min/Max Width: 1/2" (12mm) / 8" ( 200mm)
• Min/Max Thickness: 1/4" (5mm) / 6" (150mm)
• Equipment :
• Semi-Automatic Loader; Falcioni Model FMC 4500/30
• unit designed to semi-automatically load moulding profiles
• belt feed section controlled by a stepless inverter drive
• loading arms with PVC coated belts
• Profile Denibbing/Sanding Machine, DVS Model DCS 82
• Steel Footings with Aluminum frame and supports
• Cast Iron Support Columns with dovetail slides for stable mounting
• Adjustment of Eight (8) sanding units
• Variable drive speed controlled by frequency inverter
• Alignment guides with rubber wheels for secure tracking
• Easy one-step adjustable hold-down for fast set-up
• Free standing control cabinet provides centralized control board for machine functions
• Emergency switches placed on panel and on conveyor
• Belt Conveyor for Mouldings, Falcioni Models FMN 2500
• In-Line Profile Spray Machine, DVS Model SKN 15
• Steel structure
• In-line adjustable guides with side wheels to keep the part centred.
• Top spring loaded wheel to hold the product in place.
• Urethane rubber wheels with bearings
• Photocell barrier
• Control panel, the PLC computer and the pressure regulators
• The spay-booth walls are stainless-steel.
• Adjustable Teflon coated gun brackets
• Removable stainless steel recovery tray
• Belt cleaning by means of blade
• Forced air intake system
• Belt Conveyor for Mouldings, Falcioni Models FMN 1500
• 180° Cross Transfer Oven System, Falcioni Models FMFP 180/4500/7000/IR & FMT 180/4500/7000/22
• Combination oven system provides an environment of:
• a. laminar flow hot air movement (FEV E); section length 3000 mm (9' 10")
• b. high velocity hot air movement with two (2) infrared lamps (FEV EU/IR); section length 4000 mm (13' 2")
• c. for use in the flash-off and drying processes
• At the designed line speed this system will provide dwell times of approximately two and one half (2.5) minutes laminar flow air, two and one half (2.5) minutes of high velocity air with infrared radiation
• Longer dwell times can be achieved with slower line speeds gas heat exchanger with automatic temperature adjustment unit supplies and maintains heated air to oven two (2) banks of infrared radiation
• Belt Conveyor for Mouldings, Falcioni Models FMN 2500
• Profile Denibbing/Sanding Machine, DVS Model DCS 82
• Steel Footings with Aluminum frame and supports
• Cast Iron Support Columns with dovetail slides for stable mounting
• Adjustment of Eight (8) sanding units
• Variable drive speed controlled by frequency inverter
• Alignment guides with rubber wheels for secure tracking
• Easy one-step adjustable hold-down for fast set-up
• Free standing control cabinet provides centralized control board for machine functions
• Emergency switches placed on panel and on conveyor
• Belt Conveyor for Mouldings, Falcioni Models FMN 2500
• In-Line Profile Spray Machine, DVS Model SKN 15
• Steel structure
• In-line adjustable guides with side wheels to keep the part centred.
• Top spring loaded wheel to hold the product in place.
• Urethane rubber wheels with bearings
• Photocell barrier
• Control panel, the PLC computer and the pressure regulators
• The spay-booth walls are stainless-steel.
• Adjustable Teflon coated gun brackets
• Removable stainless steel recovery tray
• Belt cleaning by means of blade
• Forced air intake system
• Belt Conveyor for Mouldings, Falcioni Models FMN 1500
• 180° Cross Transfer Oven System, Falcioni Models FMFP 180/4500/9000/IR & FMT 180/4500/9000/22
• Combination oven system provides an environment of:
• a. laminar flow hot air movement (FEV E); section length 3000 mm (9' 10")
• b. high velocity hot air movement with two (2) infrared lamps (FEV EU/IR); section length 4000 mm (13' 2")
• c. high velocity chilled air movement (FEV RU); section length 2000mm (6' 6")
• d. for use in the flash-off, drying, and panel cool down processes
• At the designed line speed this system will provide dwell times of approximately
• two and one half (2.5) minutes laminar flow air, two and one half (2.5) minutes of high velocity air with infrared radiation, and one (1) minute of high velocity chilled air movement
• Longer dwell times can be achieved with slower line speeds
• Hot water heat exchanger with automatic temperature adjustment unit supplies and maintains heated air to oven
• Two (2) banks of infrared radiation
• Belt Conveyor for Mouldings, Falcioni Models FMN 2500
• Profile Denibbing/Sanding Machine, DVS Model DCS 82
• Steel Footings with Aluminum frame and supports
• Cast Iron Support Columns with dovetail slides for stable mounting
• Adjustment of Eight (8) sanding units
• Variable drive speed controlled by frequency inverter
• Alignment guides with rubber wheels for secure tracking
• Easy one-step adjustable hold-down for fast set-up
• Free standing control cabinet provides centralized control board for machine functions
• Emergency switches placed on panel and on conveyor
• Belt Conveyor for Mouldings, Falcioni Models FMN 2500
• In-Line Profile Spray Machine, DVS Model SKN 15
• Steel structure
• In-line adjustable guides with side wheels to keep the part centred.
• Top spring loaded wheel to hold the product in place.
• Urethane rubber wheels with bearings
• Photocell barrier
• Control panel, the PLC computer and the pressure regulators
• The spay-booth walls are stainless-steel.
• Adjustable Teflon coated gun brackets
• Removable stainless steel recovery tray
• Belt cleaning by means of blade
• Forced air intake system
• Belt Conveyor for Mouldings, Falcioni Models FMN 1500
• 90° Cross Transfer Oven System, Falcioni Models FMFP 90/4500/10500/IR & FMT 90/4500/10500/22
• Combination oven system provides an environment of:
• e. laminar flow hot air movement (FEV E); section length 3000 mm (9' 10")
• f. high velocity hot air movement with two (2) infrared lamps (FEV EU/IR); section length 4000 mm (13' 2")
• g. high velocity chilled air movement (FEV RU); section length 4000mm (13' 2")
• h. for use in the flash-off, drying, and panel cool down processes
• At the designed line speed this system will provide dwell times of approximately two and one half (2.5) minutes laminar flow air, two and one half (2.5) minutes of high velocity air with infrared radiation, and three (3) minutes of high velocity chilled air movement
• Longer dwell times can be achieved with slower line speeds
• Hot water heat exchanger with automatic temperature adjustment unit supplies and maintains heated air to oven
• Two (2) banks of infrared radiation
• Gun & Pump Package
• One (1) Low Pressure Pump
• Six (6) Low Pressure Spray Guns
• Two (2) High Pressure Pumps
• Twelve (12) High Pressure Spray Guns (Air-Assisted Airless)