New RFS-Protech Model SL 36 x 48 High Freq Gluer

Stock #13200N - Available (New)



  • Curing area: 36" x 48" x 2" thick
  • Clamping pressure is applied by multipower (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures
  • Unlike presses without multipower cylinders which require booster compressors, the Model SL reaches full capacity at 100 psi plant air pressure
  • Edge pressure is applied by six (6) each pusher shoes, each with a 4" bore x 4" stroke twin-piston multipower pneumatic cylinder
  • Top platen pressure is applied by two (2) 3-1/4" dia. x 20" stroke pneumatic cylinders that keeps the footprint to a minimum while still allowing the operator full access to the platen area
  • The platen is set at a 45 degree angle, and the top platen opens wide; allowing the operator to step inside the press for ergonomic and accurate parts placement
  • The internal solid state RFS Protech 4KW generator cures approximately 400 square inches of glue line per minute
  • The generator features solid state rectifiers and all aluminum cabinet for maximum conductivity and superior performance
  • Two-hand no-tie-down safety controls for closing top platen
  • Controls are simple to understand, and are complete with the required push-buttons, switches, meters, digital operator display, and on-screen troubleshooting diagnostics
  • The machine is controlled by a PLC for dependability and efficient maintenance
  • All controls will be provided for safe and efficient operation
  • The operator screen permits efficient operation, and the included press diagnostics screens assist in troubleshooting when the need arises. Proper interfaces will be provided for operational signals and emergency system stop
  • All necessary RF controls, including buttons, meters and PLC operator interface panel are mounted on a control panel attached to the left front of the press
  • Interlocked top platen and safety switches on all access doors insure operator safety
  • Power requirements are 480 volt, 60 cycle, 3 phase electric
  • Other voltages are available, please specify
  • Circuit breaker protection is provided
  • A service disconnect is required for safety, but is not provided

Additional Machine Information
- RFS Protech- Model SL 3648 and 3660.pdf

You may also be interested in