Tree Products

Used Stanza Model STM UV Finishing line 24" roll coat, wipers, UV Oven

Stock #29133 - Available (As Is)

PRICE: CALL FOR PRICE

29133-01.JPG
29133-01.JPG
29133-02.JPG
29133-03.JPG
29133-04.JPG
29133-05.JPG
29133-06.JPG
29133-07.JPG
29133-08.JPG
29133-09.JPG
29133-10.JPG
29133-11.JPG
29133-12.JPG
29133-13.JPG
29133-14.JPG
29133-15.JPG
29133-16.JPG
29133-17.JPG
29133-18.JPG
29133-19.JPG
29133-20.JPG
29133-21.JPG
29133-22.JPG
29133-23.JPG
29133-24.JPG
29133-25.JPG
29133-26.JPG
29133-27.JPG
29133-28.JPG
29133-29.JPG
29133-30.JPG
29133-31.JPG
29133-32.JPG
29133-33.JPG
29133-34.JPG
29133-35.JPG
29133-36.JPG
29133-37.JPG
29133-38.JPG
29133-39.JPG
29133-40.JPG
29133-41.JPG
29133-42.JPG
29133-43.JPG
29133-44.JPG
29133-45.JPG
29133-46.JPG
29133-47.JPG
29133-48.JPG
29133-49.JPG
29133-50.JPG
29133-51.JPG
29133-52.JPG
29133-53.JPG
29133-54.JPG
29133-55.JPG

  • Model STM UV Finishing line 24" roll coat, wipers, UV Oven
  • Model CV3 belt conveyor 24" wide x 10' long with 1/2HP motor
  • Mode RC 24-B roll coater
  • Work Maximum work piece dimension 24" w x 3" thick
  • Feed speed 10-40 fpm with 1HP inverter controlled motor
  • Application Roller #1 - Rubber coated UV/chemical resistant, 9 degree
  • Application Roller #2 - Rubber coated UV/chemical resistant, 25 degree
  • Chrome plated doctor rolls with scraper
  • Roller drive motors 1HP inverter controlled
  • Two Graco double diaphragm pumps UV capable
  • Model CV2 belt conveyor 24" wide x 6' long with 1/2HP motor
  • Model BS 24/3 Three Head Stain Wiper 24" width capacity
  • Feed speeds 10-40 fpm with 1.5HP motor inverter controlled
  • Brush head speed - variable to 1000 RPM
  • Brush head motors 1HP each
  • Brush mounts are quick change type
  • Head adjustment is hand wheel with relative readout
  • Model RUV24/3 UV Cure Oven 24" wide x 3" thick capacity
  • Feed speed 10-40 fpm with 1/2HP motor inverter controlled
  • Feed belt is metal lattice
  • Exhaust fan motor 3/4HP
  • UV lamps (3 sets) 300 watt/inch
  • UV lamp control - 2 stage power adjustment with amp meters
  • Four (4) position lamp height adjustment
  • UV cabin temperature control - Heat probe with monitor and overtemp hazard signal
  • 230v, 3ph
  • New in 2012
  • This item is part of a facility liquidation. The buyer will be responsible for removal costs and arrangements.

You may also be interested in