Stock #101232N - Call For Availability (New)
PRICE: CALL FOR PRICE
- PMK Systems Model C-1205 HSK-Servo End Matcher/Coping Machine
- 2 (two) 7.5 hip motors - 460 volts
-
Direct drive spindles
-
Up to 32 programmable settings for proper configuration of the tooling and back fence
-
Servo drives on both spindles for proper location of tooling (Maximum 3-inch movement up & down of spindles)
-
Servo drive on back fence 2-inch movement in and out
-
Chip-free coping or end-matching
-
THK style rails for the guidance of carriage stroke and hold-down clamp
-
Side pressure clamp insures proper alignment with the fence
-
Cycle time adjustable from 4 to 10 seconds
-
Two Digital Scales for fine adjustment of spindles during setup
-
Cutter diameter Minimum 3.5” OD Maximum 6” OD
-
Maximum SIZE part 3/4” thick depending on profile & density of wood 13 ½” wide
-
Maximum cut up to ¾” depending on profile & density of the wood
-
Minimum part width determined by the O.D. of the cutter and if the part is profiled or not
-
4 (four) HSK 63F SPINDLES/TOOL HOLDERS Tool holder / Milling arbor 1.25”
-
Spindle length 55mm, 2.165”
-
Dust Hood With 5” port 1000 CFM required
-
C-1205-foot print Width 68” / Depth 32” / Height 64”
-
Air Pressure CFM 10 100 PSI, air line 5/8” dia for more volume
You may also be interested in
