Saws - Gang Rip

Used Mereen-Johnson Model 424-DC Gang Rip Saw w/ Fast TRACK Infeed System

Stock #86204 - Sold (As Taken From Service)

PRICE: CALL FOR PRICE

201538-2.jpeg
201538-2.jpeg
201538-4.jpeg

  • Mereen-Johnson Model 424-DC Straight Line Multiple Rip Saw with the TwistLock Quick Change Saw Set Up System and Fast TRACK Infeed System for 16' Lumber
  • Arbor Space 24"
  • Thickness to 3-1/2" Using 14" Diameter Tooling
  • 75 HP 3600 RPM TEFC Mereen-Johnson Direct Arbor Drive
  • 3 HP TEFC Heavy Duty Direct Coupled Feed Drive Assembly with Variable Frequency Drive
  • Feed Rates 30' to 235' Per Minute
  • Programmable Current Trip Jam Protection
  • Mereen-Johnson Exclusive POSI-FEED™ Dip Bed Carried on Precision Machined and Hardened 5" Pitch DOUBLE-VEE™ Chain, Contoured™ Hardened Dip Cams
  • Extruded Structural Aluminum Feed Bed Slats with Replaceable Steel Backed Rubber Insert Strips
  • Oil Mist Lube with Low Level Auto Shut-Off
  • Four 3" Diameter Air Loaded Overhead Idle Press Rolls
  • Full-Width Segmented Maple Overhead Spring Loaded Bed Plat
  • Powered Vertical Adjust of Press Rolls and Bed Plate for Unit Vertical Adjust Through Up/Down Push Button Controls
  • Manual Handwheel Adjust with Scale and Pointer Thickness Reference
  • One 24" Capacity Keyed Sleeve, Arranged for TwistLock Collars, 14" Maximum Dia. Tooling
  • Single Bottom and Double Upper Infeed, and Single Upper Outfeed
  • Laser Mounting Stand, Floor Mounted Arranged for Mounting up to Twelve (12) Laser Lights
  • Six (6) Laser Lights with Mounting Brackets Included
  • One Floor Mounted Swing Arm with Saw Position Gauge Bar with Ten Slide to Position Collars to Facilitate Laser Alignment
  • Fast Track Infeed - Operator Manually Loads Individual Boards onto the Infeed Chains
  • Boards are Automatically Sequenced to the Positioning Fence
  • The Operator Adjusts the Fence with Reference to the Overhead Laser Lights for the Best Rip Pocket(s) Location of the Blades on the Gang Rip Saw
  • Operator Accepts the Solution Thru a Pushbutton on the Joystick; Board is Lowered onto the Driven Roll Case and Upper Pinch Rolls Feed the Board into the Gang Rip Saw
  • Serial No. MJ-7710
  • NEW IN 2015

You may also be interested in