Tenoners - Single End

Used PMK Systems Model 1205 End Matcher/Coping Machine

Stock #10051 - Available (As Taken From Service)

PRICE: CALL FOR PRICE

10051-01.jpg
10051-01.jpg
10051-02.jpg
10051-03.jpg
10051-04.jpg
10051-05.jpg
10051-06.jpg
10051-07.jpg
10051-08.jpg
10051-09.jpg
10051-10.jpg
10051-11.jpg
10051-12.jpg
10051-13.jpg
10051-14.jpg
10051-15.jpg
10051-16.jpg
10051-17.jpg
10051-18.jpg
10051-19.jpg

  • PMK Systems Model 1205 End Matcher/Coping Machine
  • The PMK C-1205 Produces Chip free coping/end-matching of squared or profiled parts without the need of a back-up piece
  • Two counter-Rotating Spindles
  • Spindle Diameters: 1-1/4"
  • Spindle Speeds: 7,000 RPM
  • Main Motor: 7-1/2 HP Motor
  • Maximum Cutter Diameter: 5" OD
  • Minimum Cutter Diameter: 3-1/2" OD
  • Maximum Part Size: 2" Thick x 13.5" Wide
  • Minimum Part Length: 3"
  • Maximum Depth of Cut: 3/4" Depending on Profile & Density of Wood
  • Minimum width of part is determined by the O.D. of the cutter and if the part is profiled or not
  • Unlimited Part Length
  • External flow valve allows you to adjust the speed of the sliding table according to the thickness, width & density of the part
  • Cycle time adjustable from 5 to 10 seconds
  • The C-1205 has the capacity to stack tooling
  • Maximum two cutters per spindle
  • Dust Hood with 5" Port
  • Dust Collection Requirement: 1,000 CFM
  • Precision THK rails for guidance of carriage stroke and hold down clamp
  • Side pressure clamp ensures proper alignment with fence
  • 230 Volt
  • Serial No. B2032

You may also be interested in