Material Handling

Used Automated Lumber Handling Tilt Hoist and Material Handling for Planer or Rip Line

Stock #44390 - Available (As Taken From Service)

PRICE: CALL FOR PRICE

DSC00081.JPG
DSC00081.JPG
DSC00080.JPG
DSC00084.JPG
DSC00085.JPG
DSC00082.JPG
DSC00083.JPG
DSC00086.JPG
DSC00087.JPG
DSC00088.JPG
DSC00089.JPG
DSC00090.JPG
DSC00091.JPG
DSC00092.JPG
DSC00093.JPG
DSC00094.JPG
DSC00095.JPG
DSC00096.JPG
DSC00097.JPG
DSC00098.JPG
DSC00099.JPG
DSC00100.JPG
DSC00101.JPG
DSC00102.JPG
DSC00103.JPG
DSC00104.JPG
DSC00105.JPG
DSC00141.JPG
DSC00142.JPG
DSC00143.JPG
DSC00144.JPG
DSC00145.JPG
DSC00147.JPG
DSC00148.JPG
DSC00149.JPG
DSC00106.JPG

  • ALH Three Strand Live Chain Infeed Package Deck 131" Wide x 25 ft Long X 53-1/2" High
  • Three(3) 2-1/4" Wide Flat Top Chain Strands
  • Chain Spacing 60"
  • Drive Motor 15 HP
  • ALH Lumber Break Down Tilt Hoist 151" Wide x 103" High
  • Tilt Hoist Arms are 5" Wide x 48" Long
  • Two (2) Hydraulic Cylinder to Lift Pack and Two(2) to Tilt Pack
  • Hydraulic Pump Motor 20 HP
  • Stick Removal Conveyor 11" Belt with 2HP Motor
  • Incline Sticker Unloading Conveyor Table 2 HP
  • Boards then feed onto an ALH Six Strand Chain Deck 11' Wide x 22' Long with 5 HP Motor
  • 2-1/4" Wide Flat Table Deck Chains
  • Chain Spacing (left to right) 24"/36"/24"/24"/21"
  • After Planer or Rip Saw (not Included) ALH Four Strand Roof Top Chain Deck for Sorting 10'-6" wide x 47' long x 33" High
  • Chains are 2-3/4" wide steel roof top, Spacing (left to right) 48"/36"/36"
  • Steel Plates Decking Between Chains
  • Freestanding Infeed and Outfeed Operator Control Stations

You may also be interested in