Shapers

Used Laguna Raised Panel Master 5

Stock #93147 - Available (As Taken From Service)

PRICE: CALL FOR PRICE

IMG_0004.jpeg
IMG_0004.jpeg
IMG_0005.jpeg
IMG_0006.jpeg
IMG_0007.jpeg
IMG_0002.jpeg

  • The Raised Panel Master 5 is designed to allow a single operator to produce a complete cabinet door in less than 2 minutes. The single-piece welded steel frame provides the ultimate support for chatter-free work.The heart of the machine is a shaper spindle which holds all five cutters needed to produce a door. The spindle is powered by a 10 HP motor for smooth cuts and is quickly positioned from the front of the machine with a dial. The turret system insures complete accuracy without test cuts and the pneumatically controlled spindle height is quickly set. The 2 axis sliding table rides on linear bearings in all directions and includes a pneumatic hold-down clamp for quick setup. The pneumatic EZ fence quickly positions stock for the next cut. A large diameter tracer bearing provides perfect control for straight and curved template following. Motor: 10hp 220v 3-phase w/ VFD Speed range: 6000 to 8000 RPM Spindle: 1.25″ Diameter x 7.25″ Height Cutter capacity: up to 7″ Diameter Specifications
  • Motor: 10hp 220v 3-phase w/ VFD
  • Speed range: 6000 to 8000 RPM
  • Spindle: 1.25″ Diameter x 7.25″ Height
  • Cutter capacity: up to 7″ Diameter
  • Compressed Air Requirement: 90 PSI 1 CFM
  • Dust Port: 5″
  • Maximum Arch Height: 2 Standard
  • Maximum Material Thickness: 1.25″
  • Maximum Arch Width: 24″

You may also be interested in