Sanders Wide Belt 3+ Head

Used Heesemann Model LSM 8 Four Head 53" Wide Belt Sander

Stock #7183 - Available (As Taken From Service)

PRICE: CALL FOR PRICE

7183i-94.JPG
7183i-94.JPG
7183i-95.JPG
7183i-96.JPG
7183i-06.JPG
7183i-105.JPG
7183i-10.JPG
7183i-03.JPG
7183i-16.JPG
7183i-17.JPG
7183i-18.JPG
7183i-19.JPG
7183i-20.JPG
7183i-21.JPG
7183i-27.JPG
7183i-35.JPG
7183i-36.JPG
7183i-37.JPG
7183i-39.JPG
7183i-40.JPG
7183i-41.JPG
7183i-43.JPG
7183i-44.JPG
7183i-45.JPG
7183i-49.JPG
7183i-05.JPG
7183i-60.JPG
7183i-62.JPG
7183i-63.JPG
7183i-64.JPG
7183i-65.JPG
7183i-68.JPG
7183i-69.JPG
7183i-70.JPG
7183i-73.JPG
7183i-74.JPG
7183i-75.JPG
7183i-99.JPG
7183i-54.JPG
7183i-55.JPG
7183i-102.JPG
7183i-97.JPG
7183i-98.JPG
7183i-93.JPG

  • With Heesemann's LSM-8 sanders designed for heavy 2 to 3 shift operations, this sander is designed for whitewood sanding of veneer panels as part of a finishing line system. The cross belt is ideal for removing tape, cutting short fibers that contribute to grain raising, and eliminate the "washed-out" look that results from sanding "book-matched" veneer
  • CSD Segmented Pad System 32mm
  • Pneumatic conveyor belt cleaning
  • Electronic variable feed speed 5 to 25 mpm (16-82 fpm)
  • Vacuum table – only Heesemann builds it into the frame for superior hold down!
  • Industrial PC controller with Line Control
  • Width Capacity 53"
  • Work-piece thickness 3 mm to 140 mm (1/8" to 5.5")
  • Warped Panel Infeed Guide
  • Hold Roller for Thin and Warped Workpieces
  • Unit 1: Cross Belt Sanding Unit 2 speed motor - 13/17 KW (17.5/23 HP) Cross Belt 5400 x 150 mm (212" x 6"), with Independent Pressure Segment Belt
  • Unit 2: Longitudinal Sanding Unit segmented pad system for fine sanding 2 speed motor - 16.5/21KW (22/28 HP)
  • Unit 3: Longitudinal Sanding Unit segmented pad system for fine sanding 2 speed motor - 16.5/21KW (22/28 HP) Bi-Directional Sanding
  • Unit 4: Longitudinal Sanding Unit segmented pad system for fine sanding 2 speed motor - 16.5/21KW (22/28 HP)
  • Longitudinal Belts 2620 x 1350 mm (103" x 53")
  • Unit 5: Worpiece Cleaning Fiber Brush, Single Speed 2HP, Ionization, Pneumatic Cleaning
  • 480v, 3ph
  • Dust Extraction 9.025 cfm @ 4500 com x 3" static pressure
  • Year: 2006
  • Serial #: 2006.08.241

You may also be interested in