End Matchers

Used Friulmac Randomat T-Rex End Matcher, with Stackable Spindles for Fast Change-Over

Stock #2637 - Available (As Is)

PRICE: CALL FOR PRICE

2637i-06.JPG
2637i-06.JPG
2637i-01.JPG
2637i-04.JPG
2637i-17.JPG
2637i-19.JPG
2637i-33.JPG
2637i-18.JPG
2637i-23.JPG
2637i-27.JPG
2637i-29.JPG
2637i-32.JPG
2637i-03.JPG
2637i-38.JPG
2637i-08.JPG
2637i-37.JPG
2637i-12.JPG
2637i-14.JPG
2637i-30.JPG
2637i-34.JPG
2637i-35.JPG

  • Two Profiling Motors: 10 HP (7.50KW)
  • Two Tool Changer Motors: 0.5 HP (0.25KW)
  • Two Infeed/Outfeed Conveyor Belt Motors: 1.5 HP (1.10 KW)
  • Central Conveyor Belt: 3/4 HP (0.55KW)
  • Minimum Part Length: 4-7/8" (120mm)
  • Minimum Part Width: 1-3/16" (30mm)
  • Maximum Part Width: 9-7/8" (250mm)
  • Minimum Part Thickness: 1/2" (10mm)
  • Maximum Part Thickness: 1-3/16" (30mm)
  • Minimum Cutter Diameter: 6-5/8" (170mm)
  • Maximum Cutter Diameter: 7-7/8" (200mm)
  • 50MM Diameter Spindles
  • 11-1/4" (285mm) Spindle length under the nut for stackable tooling
  • Cutter Speed 9,000 RPM
  • Four 4-3/4" Dust Ports for each spindle(2 on the top and 2 on the rear side)

You may also be interested in