Planer/Sanders

Used DMC Model Unisand 2000US 1350-1M4+US 1230

Stock #5323 - Available (As Taken From Service)

 

rtgeneric

  • DMC Unisand 2000 Top & Bottom Planer Sander
  • Capacity 53" Wide
  • Four Heads Bottom
  • 29KW (40HP)First Bottom Head Planer 7.08" Dia. Spirial Replacable 4-Sided Carbide Insert Cutterhead with 520 4-sided 14 x 14 x 2mm Throw Away Knives
  • 29KW 40HP) Second Bottom Head Steel Contact Drum Approximately 12.5" Dia.
  • 25.5KW (35HP) Third Bottom Head Rubber Contact Drum Approximately 12.5" Dia.
  • 21.4KW (30HP) Fourth Bottom Head Platen Approximately 3" wide platen. Motor is 2-Speed (9/18 m/sec)
  • Four Head Top
  • 29KW (40HP) First Top Head Planer 7.08"Dia. Spiral Replaceable 4-Sided Carbide Insert Cutterhead with 520 4-sided 14 x 14 x 2mm Throw Away Knives
  • 29KW (40HP) Second Top Head Steel Contact Drum Approximately 12.5" Dia
  • 25.5KW (35HP) Third Top Head Rubber Contact Drum Approximately 12.5" Dia.
  • 21.4KW (30HP) Fourth Top Head Platen Approximately 3" wide Platen Motor is 2-Speed (9/18m/sec)
  • 5.5KW (7.5HP Variable Speed Feed
  • Vacuum Beds with the Bottom Head Machine hHaving a 13KW (17HP) Vacuum Motor and the Top Head Machine Having a 9KW (12HP) Vacuum Motor
  • Abrasive Belt Size; 54" x 103"
  • Additional Pressure Rolls for Short Pieces
  • Min. Panel Width 52mm(2")
  • Max Panel Height 200mm (7.75")
  • Min Panel Height 8mm (.31")
  • Dust Outlets: Bottom Machine has the following - (1) 8", (3) 7", (3) 6". Top Machine has the following - (1) 10", (3) 8", (1) 7", (3) 6"
  • Electrical Requirements: Bottom Machine 222 Amps @ 460V, Top Machine 214 Amps @ 460V

You may also be interested in