Tenoners - Double End

Used Fletcher Model FM-200D Double End Tenoner

Stock #101132 - Available (As Taken From Service)

PRICE: CALL FOR PRICE

101132a-01.JPG
101132a-01.JPG
101132a-02.JPG
101132a-36.JPG
101132a-37.JPG
101132a-05.JPG
101132a-06.JPG
101132a-07.JPG
101132a-08.JPG
101132a-09.JPG
101132a-10.JPG
101132a-11.JPG
101132a-12.JPG
101132a-13.JPG
101132a-14.JPG
101132a-15.JPG
101132a-16.JPG
101132a-17.JPG
101132a-18.JPG
101132a-20.JPG
101132a-26.JPG
101132a-27.JPG
101132a-32.JPG
101132a-33.JPG
101132a-35.JPG
101132a-39.JPG
101132a-40.JPG
101132a-41.JPG
101132a-42.JPG
101132a-43.JPG
101132a-44.JPG
101132a-45.JPG
101132a-46.JPG
101132a-48.JPG
101132a-49.JPG
101132a-50.JPG
101132a-51.JPG
101132a-52.JPG
101132a-56.JPG
101132a-60.JPG
101132a-61.JPG
101132a-64.JPG
101132a-65.JPG
101132a-66.JPG
101132a-67.JPG
101132a-68.JPG
101132a-30.JPG
101132a-31.JPG
101132a-34.JPG
101132a-04.JPG
Machine_specification_sheet_p3-6.jpg

  • Fletcher Model FM-200D Double End Tenoner
  • Width Capacity: 96"
  • Load Space 84"
  • Padded Feed Chains 1.5" Wide with Flip Up Dogs 16" on Center
  • Feed Motor:
  • Top Holddown Caterpillar Type
  • Sound Enclosure
  • Working stations:
  • Three Post Machine (Sides are Configured Differently)
  • Left Side:
  • 1st Post Front: Bottom Score Saw 2HP motors
  • 1st Post Rear: Trim/Hogging Saw 20HP Motor Tilting
  • 2nd Post Front: Top & Bottom Tenon 10HP Motors Non-Tilting
  • 2nd Post Rear: High Speed Cope 7.5HP Tilting
  • 3rd Post Front: Cope Motor 10HP Tilting
  • Right Side:
  • 1st Post Front Top Score 2HP Tilting (Extended) and Bottom Score 2HP non-Tilting
  • 1st Post Rear: Trim/Hogging Saw 20HP Motor Tilting
  • 2nd Post Front: Open
  • 2nd Post Rear: High Speed Cope 7.5HP Tilting
  • 3rd Post Front: Cope Motor 10HP Tilting
  • 3rd Post Rear Has Common Top Dado Arbor 20HP Motor
  • Serial no. 05200D-1
  • NEW IN 2005

You may also be interested in