Saws - Cut-off/Miter

New Omga Model TR 2B VIS

Stock #813810N - Available (New)

 

Screen_Shot_2020-06-16_at_12.44.15_PM.png
Screen_Shot_2020-06-16_at_12.44.15_PM.png
Screen_Shot_2020-06-16_at_12.44.23_PM.png
Screen_Shot_2020-06-16_at_12.44.33_PM.png

  • Data Sheet:
  • Max Distance Between Saws: 9'2"
  • Min Distance Between Saws: 23 5/8"
  • Min. Distance Between Saws 45 deg: 23 5/8"
  • Cross Cut Capacity 90 deg: 6 3/4"
  • Cross Cut Capacity 45 deg: 4 1/2"
  • Max. Depth of Cut: 4 1/4"
  • Motor Power: 2 x 4HP
  • Saw Blade Bore: 1"
  • Saw Blade Diameter: 15"
  • Arbor Speed: 3200
  • Dust Port: 2 x 3 1/8"
  • General Information:
  • Equipped with two heads one fixed on the left and one movable on the right
  • Each head having positive mitering stops at +45,-45 and 90 degrees
  • Controlled by an electro-pneumatic system which enables the operator to select between three automatic working cycles:
  • 1) Simultaneous cycling of both blades
  • 2) Alternate cycle allowing the machine to cut very short pieces at 45 degrees
  • 3) Single head cycling
  • Two standard pneumatic vertical clamps ensure the perfect stability of the workpiece
  • Overload protection on each of the two main motors
  • Options:
  • Vertical or horizontal pneumatic clamps
  • Extended cutting length 11' 4", 14' 7" and 18' available
  • Brackets for short pieces
  • Air over oil descent of the heads
  • Spray mist system

You may also be interested in