Edge Banders

New Vitap Model Eclipse Contour Edgebander

Stock #25740N - Available (New)

 

Screen_Shot_2020-06-08_at_1.42.08_PM.png
Screen_Shot_2020-06-08_at_1.42.08_PM.png
Screen_Shot_2020-06-08_at_1.42.19_PM.png
Screen_Shot_2020-06-08_at_1.42.27_PM.png

  • General Specifications:
  • For shaped “concave and convex “ panels 10-60 mm tichness and 1-3 mm band thickness
  • Glue and tape application on big and small shaped panels
  • Equipped with glue pot with 1 Kg capacity
  • 2 rollers to copy the shape of the piece
  • Glue application amount is adjusted via a knob
  • Set up of the glue temperature
  • Automatic guillotine for coiled material up to 3 mm x 45 mm
  • PLC to set the lenght and the cut of the tape (by means of an encoder) for open and closed pieces
  • On/off automatic feeder of the panel
  • Raisable working table for small panels
  • Utilizes 2 x 800 w heating elements with electronic temperature control via thermoregulator
  • On/off automatic feeder of the panel
  • on/off trimming unit
  • 2 rollers to copy the shape of the piece
  • Trimming station with Pneumatic Tilting
  • Trimming unit with 2 motors 0,5 Kw high frequency 15000RPM with up/down and front copiers and manual lever to lift the motors approaching the pieces to be trimmed
  • on/off trimming unit
  • 2 brazed cutters R=3, Z=6
  • Raisable working table for small panels
  • Turning table unit for large panels
  • Holding arm with vacuum table to hold the big panels for edging and trimming
  • Options
  • Slowing-down feeding speed for complex panel
  • Laser for automatic + variable speed adjustment by potentiometer
  • Glue feeder with sensor
  • Rectangular table (800 x 360 x 20 mm.) for execution of big pieces

You may also be interested in