Sanders Wide Belt 2 Head

New Timesavers Model 3321-45-86 Standard Two Head 52" Cross-Belt Polisher

Stock #70780N - Available (New)

 

Screen_Shot_2020-05-11_at_9.35.05_AM.png
Screen_Shot_2020-05-11_at_9.35.05_AM.png
Screen_Shot_2020-05-11_at_10.18.00_AM.png
Screen_Shot_2020-05-11_at_10.10.07_AM.png
Screen_Shot_2020-05-11_at_10.18.05_AM.png

  • Specifications:
  • Crossbelt abrasive belt size: 6" x 208"
  • Chevron belt size: 6" x 185"
  • Widebelt Abrasive belt size: 52" x 103"
  • Main motors: 25, 30HP
  • Maximum width stock: 51"
  • Minimum part length with vacuum bed: 6"
  • Maximum thickness opening: 6"
  • Infeed loading area: 30"
  • Feed speed: 15-45 FPM
  • Approximate full load amps at 460 volt: 141
  • Passline height: 32"-38'
  • Dust extraction: 3,850 CFM (5” static pressure)
  • Compressed air usage: 16 CFM @ 90 psi
  • Standard Features:
  • Segmented Crossbelt: (first head position)
  • Segmented D/A Sanding Head(2nd position)
  • Air Operated Disc Brakes
  • Holddown Rolls
  • PLC Controller with HMI Interface
  • Dial Indicators on Adjustable Contact Drum Heads
  • Quick Release Outboard Support
  • Main Motor Percentage Load Meter
  • Infeed Stop Bar
  • Hour Meter
  • Four Jack Bed Construction
  • Part Set-Up Device
  • Motorized Thickness Adjustment
  • U.L. Listed Components
  • Panel Cleaning Brush
  • Pop Up/Down on Contact Drums
  • Variable Speed Conveyor Drive
  • Abrasive Belt Blow-Off on Widebelt Head
  • Abrasive Belt Blow-Off on Crossbelt Head
  • Vacuum Conveyor Bed
  • A/C Frequency Drive on Crossbelt Head
  • Factory Start-up and Training

You may also be interested in