Material Handling

New Ultimizers Smart-Belt

Stock #445000N - Available (New)

 

Screen_Shot_2020-04-23_at_1.03.46_PM.png
Screen_Shot_2020-04-23_at_1.03.46_PM.png
Screen_Shot_2020-04-23_at_1.03.53_PM.png
Screen_Shot_2020-04-23_at_1.03.59_PM.png
Screen_Shot_2020-04-23_at_1.04.09_PM.png

  • General Information
  • Ultimizers “Smart-Belt” inline feeder/transfer is purpose built to maintain minimal gaps between boards going through scanners or measuring stations to the saw
  • This approach almost completely eliminates the possibility of out of sequence solutions and broken boards due to side transferring
  • The saw control touch screen monitors and controls the photocells and speeds to keep an efficient pace between the needs of the scanners and the needs of the saw
  • Speeds and spacing is user configured
  • An adjustable heavy duty hold down beam pulls the board from the feeder and locks it onto the “Smart-Belt” conveyor
  • The Conveyor is a single belt through a serpentine gap to allow room for scanner to see from the bottom up
  • Using photo cells at a very close intervals, the gap between the board in the saw and the next board from the scanner is monitored and minimized automatically
  • The purpose of this design is to allow for fully automatic scanning, or crayon mark reading measuring stations to be in line with a saw which has been proven to maintain higher production rates
  • The "Smart Belt" has a built-in gap for the scanner to look from the top, bottom and sides.

You may also be interested in