Saws - Cut-off/Miter

New CTD Model N90 Vertical frame and notching saw

Stock #813720N - Available (New)

 

Screen_Shot_2020-04-20_at_3.20.36_PM.png
Screen_Shot_2020-04-20_at_3.20.36_PM.png
Screen_Shot_2020-04-20_at_3.20.55_PM.png
Screen_Shot_2020-04-20_at_3.20.49_PM.png
Screen_Shot_2020-04-20_at_3.20.43_PM.png

  • General Specifications:
  • 3 H.P.
  • Magnetic Starter
  • 2800 RPM
  • Cutting Capacity :Toe Notch Con g.: 6" X6"(deep)X 4" (high) Mitre: 4"(wide)X 4" ( 4" X 6" available with extra charge)
  • Blade Capacity 16" OD (406mm); saw blades not included 18" OD (457mm); optional
  • Arbor: 1" (25mm) with 3-1/2" (89mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive; 2800 RPM of spindle
  • Precision machined and ground iron castings with milled keyways to guide fences; allows for easy and accurate dimensional changes
  • Air operated by foot valve with cover
  • 6 CFM at 100 PSI (.17 cubic meters/minute at 7.03 kg/cm2) based on 6 strokes per minute; includes air filter/ regulator/lubricator with auto drain
  • Up to 10 strokes per minute
  • Staggered Saw Blades/ Toe-Notch Configuration; 6" (152mm) x 6" (152mm) Deep x 4" (102mm) High
  • Mitre Cutting/Staggered Saw Blades; 4-1/8" (105mm) Wide x 4" (102mm) High
  • Mitre Configuration/Non-Staggered Saw Blades; 4" (102mm) Wide x 4" (102mm) High; up to 6" (152mm) High with special blade guard modification at extra charge
  • Heavy gage steel; stand is completely enclosed with 6" (152mm) dust collector outlet and scrap chute; 1200 CFM required

You may also be interested in