Saws - Cut-off/Miter

New CTD Model M516 Mitre cut-off saw

Stock #813690N - Available (New)

 

F426F526_2_.png
F426F526_2_.png
F526F426.png
F426526_1.png
Screen_Shot_2020-04-20_at_2.02.13_PM.png

  • General Specifications:
  • 5 H.P.
  • Magnetic Starter
  • 10 strokes per min
  • Mitres up to 45°
  • Cutting Capacity: 45°: 5¼" X 8" 90°: 5½" X 11½
  • Blade Capacity 20" OD 504mm blade not included
  • Arbor 1" 25mm with 5" 127mm saw collars
  • Spindle mounted on preloaded and sealed bearings; with V-belt drive completely enclosed; pivot uses Timken bearings lubricated for life
  • 5 H.P. Totally Enclosed Fan Cooled Motor with Magnetic Starter standard; 8 1/2 H.P
  • Heavy gage steel sheet and angle
  • Precision machined cast iron base with milled keyways to guide fences; disc set flush with base
  • Dust Outlet Two 4" (102mm) outlets provided; 1200 CFM required
  • Up to 10 strokes per minute; actual production rates will vary with the type and width of the material to be cut
  • 3 CFM at 80 PSI .09 cubic meters/minute at 5.6 kg/cm2 based on 10 strokes per minute; air filter/regulator/lubricator with auto drain included
  • Optional Extras:
  • Power downfeed of sawhead, clamps, measuring system and table support
  • Power Downfeeds of Sawheads actuated by Two-Hand, Anti-Tie Down Maintained Contact Safety Control
  • 10 H.P., & 15 H.P. motors available as optional extra.

You may also be interested in