Stock #813680N - Call For Availability (New)
PRICE: CALL FOR PRICE
- General Specifications:
-
5 H.P.
-
Magnetic Starter
-
10 strokes per min
-
Mitres up to 45°
-
Cutting Capacity: 45°: 3" X 8", 90°: 3" X 11
-
Blade Capacity 16" OD 406mm
-
Arbor 1" 25mm with 5" 127mm saw collars
-
Spindle mounted on preloaded and sealed bearings; with V-belt drive completely enclosed; pivot uses Timken bearings lubricated for life
-
5 H.P. Totally Enclosed Fan Cooled Motor with Magnetic Starter standard; 8 1/2 H.P
-
Heavy gage steel sheet and angle
-
Precision machined cast iron base with milled keyways to guide fences; disc set flush with base
-
Dust Outlet Two 4" (102mm) outlets provided; 1200 CFM required
-
Up to 10 strokes per minute; actual production rates will vary with the type and width of the material to be cut
-
3 CFM at 80 PSI .09 cubic meters/minute at 5.6 kg/cm2 based on 10 strokes per minute; air filter/regulator/lubricator with auto drain included
-
Power downfeed of sawhead, clamps, measuring system and table support
-
Power Downfeeds of Sawheads actuated by Two-Hand, Anti-Tie Down Maintained Contact Safety Control
-
10 H.P., & 15 H.P. motors available as optional extra.
You may also be interested in
