Saws - Cut-off/Miter

New CTD Model F426 Cut Off Saw

Stock #813670N - Call For Availability (New)



  • General Specifications:
  • 5 H.P.
  • Magnetic Starter
  • 10 strokes per min
  • 90° Only
  • Cutting Capacity 90°: 3" X 11
  • Blade Capacity 16" OD (406mm); saw blades not included
  • Arbor 1" (25mm) with 5" (127mm) saw collars
  • Spindle mounted on preloaded and sealed bearings; with V-belt drive completely enclosed; pivot uses Timken bearings lubricated for life
  • Totally Enclosed Fan Cooled Motor with Magnetic Starter standard; 8½ H.P.
  • Heavy gage steel sheet and angle
  • Precision machined cast iron base with milled keyways to guide fences; disc set flush with base
  • Dust Outlet Two 4" (102mm) outlets provided; 1200 CFM required
  • Up to 10 strokes per minute; actual production rates will vary with the type and width of the material to be cut
  • Hand operated standard; optional Power Downfeeds of Sawheads actuated by Two-Hand, Anti-Tie Down Maintained Contact Safety Control
  • 3 CFM at 80 PSI (.09 cubic meters/minute at 5.6 kg/cm2) based on 10 strokes per minute; air filter/regulator/lubricator with auto drain included
  • Optional Extras:
  • Power Downfeeds of Sawheads, Clamps, Measuring Systems and Table Supports
  • 10 H.P., & 15 H.P. motors available as optional extra.

You may also be interested in