Stock #813660N - Call For Availability (New)
PRICE: CALL FOR PRICE
- General Specifications:
-
Blade Capacity: 20"
-
5 H.P. 3 phase
-
Magnetic Starter
-
10 strokes per min
-
90° Only
-
Cutting Capacity 90°: 5½" X 11½
-
20" OD (504mm); saw blades not included
-
Arbor 1" (25mm) with 5" (127mm) saw collars
-
Spindle mounted on preloaded and sealed bearings; with V-belt drive completely enclosed; pivot uses Timken bearings lubricated for life
-
Heavy gage steel sheet and angle
-
Precision machined cast iron base with milled keyways to guide fences; disc set flush with base
-
Two 4" (102mm) dust outlets provided; 1200 CFM required
-
Up to 10 strokes per minute; actual production rates will vary with the type and width of the material to be cut
-
3 CFM at 80 PSI (.09 cubic meters/minute at 5.6 kg/cm2) based on 10 strokes per minute; air filter/regulator/lubricator with auto drain included
-
Power Downfeeds of Sawheads, Clamps, Measuring Systems and Table Supports.
10 H.P., & 15 H.P. motors available
-
Power Downfeeds of Sawheads actuated by Two-Hand, Anti-Tie Down Maintained Contact Safety Control
You may also be interested in
