Automatic cut off saw for defecting and optimized cutting
Feeding by 7 corrugated rollers with a maximum speed of 180 m/min and a tolerance on the cut length of +/- 1 mm
The set of 7 feeding rollers with corresponding top pressure rollers are able to compensate for dimensional variations of rough mill stock
Pressure rollers, sitting on pneumatic cylinders, allow the feeding of boards with rough surface and sensible variations in thickness
The control, with operating system Windows XP
On request the cutting line can be completed with a width scanner, a second camera for handling up to 5 grades (3 grades with the only standard camera) an ink-jet printer and with various length sorting systems
Suitable for high production requirements given its very high maximum feed speed of 240 m/min
Windows based PC
Cutting lists can be input directly from the PC keypad, USB port, with direct serial connection to a remote PC or directly through the network
Software complete with diagnostic and can also provide the following information:
Stock, in cubic meters, required to produce the number of pieces in each list
Number of pieces produced of each length
Amount of stock in cubic meters divided into: first, second, third grade and waste
Cubic meters required to produce remaining parts
Yield as a percentage of the total
The system can perform simulated cutting to test the result before processing the wood and allowing the user to decide about the parameter setting for the required production
AVAILABLE OPTIONS:
Infeed Roller Tables
Width Scanner
Two Sided Marking Stations
2nd horizontal reading Camera (for up to 5 grades)