Presses

New Italpresse Model XL8 32-16 PABO Hydraulic Hot Press

Stock #12800N - Available (New)

 

Screen_Shot_2020-04-06_at_8.43.49_AM.png
Screen_Shot_2020-04-06_at_8.43.49_AM.png
Screen_Shot_2020-04-06_at_8.44.04_AM.png

  • Platen dimensions: 3,200 x 1,600 mm (126 x 63 in.)
  • Number of daylights: 1
  • Total cylinder stroke: 400 mm (15 ¾ in.)
  • Number of pressing cylinders: 8
  • Total thrust: 160 metric tons (176,000 lbs)
  • Max. laminating pressure: 3.9 kg/cm2 (55 psi)
  • Hydraulic pump: 3 kw (4 hp)
  • Boiler power: 27 kw
  • Maximum platen temperature: 120o C (248o F)
  • Torsion free, heavy-duty press frame fabricated from welded structural steel
  • Engineered steel platens heated by circulation of thermal oil – Fast Heat-up Time!
  • Platens covered with easy to replace, glue resistant Mylar film
  • Self-lubricating corner guides and rack and pinion system to maintain parallelism of the press platens during opening and closing
  • Automatic regeneration of pressure during press cycle
  • Electrical resistance thermal oil boiler, complete with circulation pump, expansion tank, thermostatic controls, and automatic startup timer
  • TS-400 color graphic touch screen controller with the following features:
  • Memory for 200 programs containing different panel dimensions, laminating pressures, cycle times, and platen temperatures
  • Automatic calculation of the hydraulic pressure based on programmed panel dimensions
  • Automatic exclusion of one or two pairs of press cylinders based on programmed panel dimensions
  • Digital temperature control of the platen temperature
  • Digital pressing timer with automatic initiation of press opening and panel unloading
  • 7-day auto startup and shut down timer for the thermal oil boiler
  • PLC I/O status monitoring for troubleshooting
  • Display of fault and warning messages
  • EFC System - sensors to detect deflection of the lower platen and stop the buildup of pressure in case of improper positioning of the panels
  • Dual cycle-start buttons requiring two hands to initiate cycle for safety
  • Safety pull rope on all four sides with emergency stop switch
  • Safety locking plates to secure the mobile lower platen while performing maintenance on the hydraulic system
  • UL approved electrical components

You may also be interested in