Sanders Wide Belt 3+ Head

New Woodtech Model WTM QSG 1350 RRRPA

Stock #71660N - Available (New)

 

Screen_Shot_2020-04-03_at_10.42.07_AM.png
Screen_Shot_2020-04-03_at_10.42.07_AM.png
Screen_Shot_2020-04-03_at_10.42.48_AM.png
Screen_Shot_2020-04-03_at_10.42.39_AM.png
Screen_Shot_2020-04-03_at_10.42.27_AM.png
Screen_Shot_2020-04-03_at_10.42.19_AM.png

  • Basic Features
  • Working Width: 1350mm
  • Service Side: Left
  • Brush Unit for Cleaning
  • Roller Roller Combination (Roller and Pad)
  • Working Thickness: 3-150mm
  • Minimum Working Length: 460mm Feed Speed: 0-19m/min (inverter)
  • Belt Size: 1380x2620mm
  • First Belt Motor: 22kw (30HP)
  • Second Belt Motor: 18.5kw (20HP)
  • Third Belt Motor: 15kw (20HP)
  • Machine Frame
  • Built with rectangular profiled steel beams to give very high rigidity to the frame; Main motors are positioned inside the frame in a protected position
  • Machine frame is assembled with high strength hardware (8.8G), also welded for maximum strength
  • V-belt drive from main motors to each sanding head, disk brakes on each drum for emergency stopping
  • Hold Down Units
  • Hold down units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head with independent variable pressure control
  • Standard chrome plated press shoes for high accuracy applications
  • Press shoes installed close to the sanding drum, suitable for sanding short pieces
  • Feed System
  • Feed table is made of steel with a surface tolerance within 0.05mm; And finely polished to avoid wear of the inside of the feed belt
  • Feed table is heat treated for consistency and durability
  • Feed belt surfaced in high quality rubber compound to provide accuracy and durability, with surface profiled according to application requirement
  • Feed speed variable from 0-19m/min

You may also be interested in