Sanders Wide Belt 3+ Head

New Woodtech Model WTM FSG 1350 RRRPA

Stock #71640N - Available (New)



  • Basic features
  • Constant Pass Line
  • Working Width: 1350mm
  • Service Side: Left
  • Roller Roller Combination (Roller and Pad)
  • Technical Data
  • Working Thickness: 3-100mm
  • Minimum Working length: 460mm
  • Feed Speed: 0-19m/min (Variable Speed)
  • First Belt Motor: 22kw (30HP)
  • Second Belt Motor: 18.5kw (25HP)
  • Third Belt Motor: 15kw (20HP)
  • Machine Frame
  • Built with rectangular profiled steel beamss to give high strength to the frame;Main motors are positioned inside the frame in a protected position
  • Machine frame is assembled using high strength bolts (8.8G), also welded for durability
  • V-belt drive from main motors to sanding heads, With disk brakes on each main motor for emergency stops
  • Hold Down Unit
  • Hold down units to hold the work pieces on the feed belt; are positioned in front and rear of each working unit: independent variable pressure control
  • Tower-type press rollers structure to ensure the stability of the boards during sanding, could be better to sand uneven material
  • The press rollers close to the sanding roller maximum, is suitable for sanding short pieces
  • Feed System
  • This machine is features a fixed sanding bed height for constant height pass line use, the working height is 850mm
  • Feed table is made of steel, and precision machined to a flatness within 0.05mm; tabled surface is polished to avoid wear
  • The feed table is heat treated for consistency and durability
  • Rubber Feed belt with surface in rubber at appropriate hardness
  • Top profile designed according to operation requirement
  • Feed speed variable from 0-19m/min.

You may also be interested in