Sanders Wide Belt 3+ Head

New Woodtech Model WTM DSG 1100 RRRPA

Stock #71610N - Available (New)



  • Basic Features
  • Roller Roller Combination (roller and pad)
  • Working width: 1100mm
  • Sevice side: left
  • Brush unit for cleaning material
  • General Technical Data
  • Working thickness: 5-100mm
  • Minimum Working length: 450mm
  • Feed Speed: 0-19m/min
  • First Belt Speed: 22m/s
  • Second Belt Speed: 22m/s
  • Third Belt Speed: 16m/s
  • Frist Belt Motor: 22kw/30HP
  • Second Belt Motor: 18.5kw/25HP
  • Third Belt Motor: 15kw/20HP
  • Machine Frame
  • Built with rectangular profiled steel elements to give a very high rigidity to the frame;main motors positioned inside the frame in a protected position
  • Machine frame is assembled with high strength bolts (8.8G),And also welded for maximum stability
  • Transmission from main motors to working units with V-belts and pulleys, disk brakes on each working unit for emergency stop
  • Pressure Units
  • Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each working unit: independent variable pressure control
  • Tower-type press rollers structure to make sure the stability of the boards during Sanding, could be better to polish the curve and deformed boards
  • The press rollers close to the sanding roller maximum, is suitable for short pieces sanding
  • Feed System
  • Feed table is made of steel, with tolerance of flatness within 0.05mm; table surface polished to avoid wear of the internal side of the feed belt
  • Feeding table with vacuum device
  • Feed belt with surface in rubber
  • Drive motor with speed control for precision feed speed adjustment
  • Feed speed variable in continuous from 0-19m/min
  • Rubber faced drive roller to eliminate belt slippage

You may also be interested in