Moulders

New Woodtech Model WTM-623 9" moulder

Stock #47920N - Available (New)

 

Screen_Shot_2020-04-02_at_8.49.22_AM.png
Screen_Shot_2020-04-02_at_8.49.22_AM.png
IMG_0418.jpeg
IMG_3489.jpeg
IMG_3505.jpeg
IMG_3506.jpeg
IMG_3508.jpeg
IMG_3511.jpeg
IMG_3515.jpeg

  • No. of Spindles 6
  • Spindle RPM - 6000
  • Diamter of Shaft - 040
  • Motor Power
  • 1st Bottom 5.5kw/7.5HP
  • Right 5.5kw/7.5HP
  • Left 5.5kw/7.5HP
  • 1st Top 7.5kw/10HP
  • 2nd Top 7.5kw/10HP
  • 2nd Bottom 7.5kw/10HP
  • Feed 5.5kw/7.5HP
  • Feed Been Lift 0.75kw/1HP
  • Top Beam lift 2 x 0.25kw/0.35HP
  • Feeding Speed (m/min) 6-30
  • Features
  • Fully hermetically sealed safety cover can effectively isolate the noise, and play a role in safety protection
  • Individual motor to each spindle to ensure maximum power transmission
  • All adjustment of spindles is centralized in front of machine, to be convenient to operate
  • Spindle diameter Φ50 and two pairs of high-precision and high-load support bearing are more suitable for heavy-duty cutting
  • All Horizontal spindles are equipped with out-board bearings
  • In-feed bottom helical roller for steady feeding The front and rear bed plates of the first bottom spindle is made of special alloy steel, and double heat treating for additional wearability
  • A group of pneumatic side pressure wheels on the right side of left spindle , can be adjusted to the desired pressure
  • Pneumatic chip breakers on the infeed of the top spindles
  • Pneumatic pressure shoes on the back of top spindle
  • Electronic positioning of top spindle and feed beam
  • Pneumatic in-feed bottom helical roller is more suitable for large deformation and high moisture of the wood to feed
  • Double chromed feed bed for good durability
  • The feed bed and carriage are lubricated by manual oil pump, which is centrally controlled and easy to operate
  • Inverter to feed 5-25m/min
  • International brand electric components for long life and durabiity
  • Each motor is equipped with overload protection to protect the safety and stability of the motor
  • PLC:)Siemens (German brand)
  • Siemens for touch screen(German brand)
  • ABB()ABB for inverter(Swiss brand)
  • Schneider for low-voltage component ,such as button ,contactors, motor breaker (France brand)

You may also be interested in