Tenoners - Single End

New Pillar Model CMJ Coping/Tenoning

Stock #100800N - Available (New)

 

Screen_Shot_2020-03-17_at_9.45.08_AM.png
Screen_Shot_2020-03-17_at_9.45.08_AM.png

  • Designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker
  • In an 8-second-cycle it can process either two top/bottom rails or one mid rail that is pre-profiled
  • Simple to operate
  • It is a PLC driven machine
  • 2 counter rotating vertical spindles. The first spindle clears the leading edge of the rail while the other spindle moves in and processes the remainder of the part’s width
  • This version of the CMJ has stacked tooling that allows you to switch between two inside profiles with the flip of a switch
  • Provides a clean, tear-out free, end coped/tenoned part every time
  • Standard Features
  • 8” part width capacity
  • 2 each stacked tool per spindle
  • Counter rotating spindles
  • Scissor lock clamp
  • Auto Feed Carriage
  • 5 HP Motor
  • 5/8” max cut depth
  • 5” max cutter head diameter
  • 3” minimum part length
  • 10 second cycle
  • Material thickness: 5/8” to 1”
  • Two 4" dust ports
  • 700 CFM required
  • Options
  • 12” part width capacity
  • Tigerstop integration
  • Z axis control
  • Increased thickness for passage doors

You may also be interested in