Edge Banders

Used SCM Model K130E Automatic Edgebander - 2010!

Stock #25916 - Available (As Taken From Service)

 

25916c-02.JPG
25916c-02.JPG
25916c-03.JPG
25916c-01.JPG
25916c-04.JPG
25916c-05.JPG
25916c-06.JPG
25916c-07.JPG
25916c-08.JPG
25916c-09.JPG
25916c-10.JPG
25916c-11.JPG
25916c-12.JPG
25916c-13.JPG
25916c-14.JPG
25916c-15.JPG
25916c-16.JPG
25916c-17.JPG
25916c-18.JPG
25916c-19.JPG
25916c-20.JPG
25916c-21.JPG
25916c-22.JPG
25916c-23.JPG
25916c-24.JPG
25916c-25.JPG
25916c-26.JPG
25916c-27.JPG

  • The pressure beam has digital height indicators and a double row of pressure rollers with steel bearings
  • Edgebanding thickness: .4mm - 3mm (.016-1/8")
  • Guillotine capacity: 3.0mm
  • Feed speed: 30 ft/min.
  • Panel height: 3/8" min - 1 15/16" max
  • Minimum panel length: 5 1/2"
  • Minimum panel width: 2 3/8"
  • Minimum distance between panels: 22"
  • Three pressure rollers - The first driven roller is Teflon coated, the second and third idle rollers are spring loaded
  • The first roller is perpendicular and the second and third rollers are canted to provide extra pressure along the top and bottom edge
  • Automatic strip magazine
  • Orion 1 controller
  • End Trimming Station: This unit is composed of two independent .50 hp motors
  • It travels on THK guides
  • Edge Trimming Station: This unit is composed of two independent .7 hp motors operating at 12,000 rpm
  • All adjustments are carried out with mechanical digital readouts
  • The unit has top and bottom copy wheels and side copy shoes
  • Profile Scraping Unit: Scraping station designed to remove knife marks from thick PVC
  • Buffing Unit: The buffing unit has two .25 hp motors

You may also be interested in