Sanders Wide Belt 3+ Head

Used DMC 10 Head Distressed Effects Machine

Stock #7176 - Available (As Taken From Service)

 

7176-1.png
7176-1.png
IMG_4570.jpeg
IMG_4573.jpeg
IMG_4574.jpeg
IMG_4575.jpeg
IMG_4576.jpeg
IMG_4626.jpeg
IMG_4627.jpeg
IMG_4628.jpeg
IMG_4629.jpeg
IMG_4630.jpeg
IMG_4632.jpeg
IMG_4633.jpeg
IMG_4634.jpeg
IMG_4635.jpeg
IMG_4636.jpeg
IMG_4637.jpeg
IMG_4638.jpeg
IMG_4639.jpeg
IMG_4640.jpeg
IMG_4641.jpeg
IMG_4645.jpeg
IMG_4658.jpeg
IMG_4659.jpeg

  • DMC 10 Head Distressed Effects Machine
  • Working Units: One Steel Sanding Drum, three steel cut heads, one steel grooved drum, one soft rubber drum, one band saw, one hard rubber drum with spikes, one steel brush, one copper brush. Used to create distressed wood effects
  • 1st head is a steel drum sanding unit, designed to prepare the wood evenly to take effects from the various working units that follow
  • Heads #2, 3, & 4: Cutting drums w/ multiple blades attached to generate a distressed/hand-scraped surface
  • Cutting/scraping units can be run individually or in groups, based on the desired result
  • Programs can be fixed or variable based on the programming specifications
  • Cutting/Scraping heads are mounted on tracks for easy removal/cleaning
  • Head #5: Grooved steel sanding drum, used to finish the hand-scrapped look, or as a stand-alone unit
  • Head #6: Soft rubber drum, used to deburr and lightly sand the grooved product
  • Soft rubber drum has the ability to contour to the peaks & valleys created by the preceding units
  • Head #7: Band saw unit, used to give a sawed look in fixed or variable patterns/depths
  • Head #8: Hard rubber drum with spikes, used to give the appearance of worm/nail holes into the product
  • Head #9: Copper brush, used to lightly tear the grain to give a distressed, hand-sawn appearance
  • Head #10: Soft brush, used to clean and smooth any burrs/rough-patches
  • Variable Speed Feed from 18-27 FPM

You may also be interested in