Used Omga T2020 NC Through Feed Optimizing Saw

Stock #8048 - Available (As Taken From Service)

SALE PRICE: CALL FOR PRICE

IMG_6846.jpeg
IMG_6846.jpeg
IMG_6847_2.jpeg
IMG_6845_2.JPG

  • Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal
  • Particularly suitable for high production requirements given its very high maximum feed speed of 800 FPM
  • The set of 7 top pressure rollers are able to compensate for dimensional variations of rough mill stock
  • The machine is equipped with a PC based computer capable of performing eleven work cycle programs
  • The numerical control is able to store cutting lists with lengths divided in several different grades and the relevant quantity of parts
  • Cutting lists can be input direct from the NC keypad or directly through the network
  • The onboard PC with 19" monitor provides the following information: - Stock in cubic feet, required to produce the number of pieces in each list. - Number of pieces produced of each length. - Amount of stock in cubic feet divided into: first, second, third grade and waste - Cubic feet required to produce remaining parts. - Yield as a percentage of the total
  • The system can perform simulated cutting to verify the result before processing the wood and allowing the user to decide whether to use the chosen parameters for the required production or change it
  • The T 2020 NC can cut and handle up to 3 different grades within the same cutting list
  • Maximum Thickness: 4 3/4"
  • Maximum Width: 12 5/8"
  • Minimum part in-feed length: 23 5/8"
  • Saw Blade Motor Power : 7 1/2 HP
  • Feed Motor Power: 10HP
  • Maximum Acceleration: 50 feet per second
  • Cutting Speed: 0.2-1 seconds
  • Average Number of Cuts : 80-90 per minute
  • Specifications are written to the best of our knowledge with some being sourced from literature, we encourage you to inspect the machine and verify

You may also be interested in