Moulders

Used Leadermac Planermac Model LMC 845 PL - 8 Head Moulder

Stock #47185 - Available (As Taken From Service)

 

47185n-01.jpg
47185n-01.jpg
47185n-02.jpg
47185n-03.jpg
47185n-04.jpg
47185n-05.jpg
47185n-06.jpg
47185n-07.jpg
47185n-08.jpg
47185n-09.jpg
47185n-10.jpg
47185n-11.jpg
47185n-12.jpg
47185n-13.jpg
47185n-14.jpg
47185n-15.jpg
47185n-16.jpg
47185n-17.jpg
47185n-18.jpg
47185n-19.jpg
47185n-20.jpg
47185n-21.jpg
47185n-22.jpg
47185n-23.jpg
47185n-24.jpg
47185n-25.jpg
47185n-26.jpg
47185n-27.jpg
47185n-28.jpg
47185n-29.jpg
47185n-30.jpg
47185n-31.jpg
47185n-32.jpg
47185n-33.jpg
47185n-34.jpg
47185n-35.jpg
47185n-36.jpg
47185n-37.jpg
47185n-38.jpg
47185n-39.jpg
47185n-40.jpg
47185n-41.jpg
47185n-42.jpg
47185n-43.jpg
47185n-44.jpg
47185n-45.jpg
47185n-46.jpg
47185n-47.jpg
47185n-48.jpg
47185n-49.jpg
47185n-50.jpg
47185n-51.jpg
47185n-53.jpg
47185n-55.jpg
47185n-56.jpg
47185n-57.jpg
47185n-58.jpg
47185n-59.jpg
47185n-64.jpg
47185n-73.jpg
47185-_07.JPG
47185-_05.JPG

  • 8 head machine
  • 14" Thick x 18" Wide Capacity
  • Spindle Dia - 2 1/8"
  • Spindle Speed - 5500 RPM
  • 54" In-feed table with 6 1/2" high in-feed fence in lieu of standard
  • 3.17" (80mm) Vertical lift to side heads
  • 1.57" (40mm) axial movement of horizontal heads
  • REC-705B Quik-Trueset Setworks on Top Heads
  • REC-705B Quik-Trueset Setworks on Near Side Heads
  • Chromed Pressure Plates and Chipbreakers
  • DRO - Digital Readout in Inches
  • Hydro-lock outboard bearings on all 8 spindles inclusive of verticals as well
  • Ammeters for all respective spindles
  • 3-2 Roll Heavy Duty Feedworks
  • Baldor Electronic Spindle Brakes all spindles
  • Automatic Bed Lubrication
  • Stand Alone Control Cabinet with 15' cable
  • 1st Bottom - 40HP with max. 7.1" swing
  • 1st Rear Side Head - 50HP with max. 10" swing
  • 1st Near Side Head - 50HP with max. 10" swing
  • 2nd Rear Side Head - 50HP with max. 10" swing
  • 2nd Near Side Head - 50HP with max. 10" swing
  • 1st Top Head - 50HP with max. 10" swing
  • 2nd Top Head - 50HP with max. 10" swing
  • 2nd Bottom Head - 50HP with max. 10" swing
  • Feed Driven 20HP VFD controlled motor with feed speeds from 10-120 FPM
  • 460V, 3PH, 60 Cycles

You may also be interested in