Stock #25909 - Available (As Is)
- Edgebanding thickness capacity 0.4 mm - 3 mm
- Workpiece height capacity 10 mm - 60 mm (0.39"-2.36")
- Min panel length 140 mm (5.51")
- Feed speeds 10,15 and 20 m/min
- coil or strip edgebanding capacity
- Adjustable infeed fence
- 3" wide rubber padded table feed chain
- Adjustable hold down pressure beam with rubber contact rollers
Outboard telescopic roller top panel support arm
- 1st station: (2) counter rotating pre-milling heads - 1.8 kw (2.5 hp), 12,000 rpm
Diamond tipped cutterheads
- 2nd station: hot melt glue and edgebanding application, Top quick melt glue pre-heater system, Accepts pellet type glue
- Bottom teflon lined glue pot
Reversible direction glue roller
- Pneumatic edgebanding guillotine with 3 mm PVC capacity
- (1) 5-1/2" diameter x 3" high main pressure roller with (5) 2-1/4" diameter x 3" high aux pressure rollers
- 3rd station: End trimmers - 0.5 kw, 12,000 rpm drive motors, 0-15 degree cutting angle adjustment
- 4th station: top and bottom tilting trimmers - 1.8 kw (2.5 hp), 12,000 rpm trimmer motors, 0-30 degree tilt of heads
- 5th station: front and rear corner rounding - 0.85 kw, 12,000 rpm drive motors
- 6th station: top and bottom radius scrapping heads, Pneumatic jump control of station
- 7th station: top and bottom flat surface scrapping heads
- 8th station: top and bottom buffing heads - 0.37 kw (0.5 hp), 2800 rpm
- Sound and safety enclosures around all stations Front flip up hoods with inspection windows
- Mechanical digital readouts for station set up
- 3 kw feedworks drive motor
- Top interior dust collection line with 7" dust pipe outlet
Front operator control station
- CNI controller with electronic digital display and soft touch keypad
You may also be interested in
