Used Progressive Systems Model SB/D-36RH, Dip Chain Gang Rip Saw 36" Wide

Stock #86143 - Available (As Taken From Service)

 

86143-1.jpg
86143-1.jpg
86143-2.jpg
86143-3.jpg
86143-4.jpg
86143-5.jpg
86143-6.jpg
86143-7.jpg
86143-8.jpg
86143-9.jpg
86143-10.jpg
86143-11.jpg
86143-12.jpg
86143-13.jpg
86143-14.jpg
86143-15.jpg
86143-16.jpg
86143-17.jpg
86143-18.jpg
86143-19.jpg
86143-20.jpg
86143-21.jpg
86143-22.jpg
86143-23.jpg
86143-24.jpg

  • Progressive Systems SB/D-36 Dip Chain Gang Rip Saw with Eagle Ripmaster Fenceless Infeed
  • Keim Transfer deck 180" long x 168" wide
  • 7-stands flat chain deck design
  • Chain section 118" long x 168" wide
  • Chain spacing 23" / 23" / 31" / 32" / 41 1/2" / 23"
  • (2) Sets of flip-up stops
  • (6) Flip ups for operator to evaluate board and/or flip the board
  • (6) Flip ups that transfer the board to the lateral feed
  • (2) drive motors: (1) 1HP, 240/460v and (1) 2HP, 230/460v
  • Operator’s station that controls lasers and feed rate
  • Bridge mounted laser system with (13) lasers
  • Operator station has manual over-ride and original solution controls Lateral feed section with five rollers (four idle and one driven)
  • All rollers are rubber covered
  • (3) Top mounted pinch rollers to assist with infeed to the gang saw
  • Progressive Gang Rip 36" capacity
  • Saw sleeves 3-1/8" diameter, double keyed
  • 75HP saw motor, 208-230/460v, 3PH
  • Three(3) Sets of kick-back fingers on the infeed side and one set on the outfeed side
  • Feed Motor 5HP
  • Variable feed speed approx. 30-150 fpm
  • Top-mounted pressure rollers
  • Side mounted electrical and control cabinets
  • 14" diameter blade capacity
  • 3 1/2" maximum blade cut
  • Keim motorized outfeed belt conveyor with pinch roller
  • Overall dimensions 245" long x 60" wide
  • 43" wide belt
  • 2HP motor, 230-190v/460-380v
  • Pneumatically actuated pinch roller
  • Variable speed control of the belt
  • Includes walk-over safety platform
  • 48" long x 32" wide x 45" high

You may also be interested in