New PMK Systems C-1203 Coping/End Matching Machine

Stock #100202N - Available (New)

 

100202N-1.jpg
100202N-1.jpg

  • Chip free coping or end-matching of squares or profiled parts without the need of a back-up piece
  • Two counter rotating spindles
  • Spindle Diameters: 1-1/4"
  • Spindle Speeds: 7,000 RPM
  • Main Motor: 7-1/2 HP, 230/460 volts (please specify your voltage)
  • Maximum Cutter Diameter: 5" OD
  • Minimum Cutter Diameter: 3-1/2" OD
  • Maximum Part Size: 2-1/2" Thick x 9-1/2" Wide
  • Minimum Length of Part: 3"
  • Maximum Depth of Cut: 3/4"
  • Minimum part width is determined by the O.D. of the cutter and if the part is profiled or not
  • Unlimited Part Length
  • External flow valve allows you to adjust the speed of the sliding table according to the thickness, width & density of the part
  • New Safety lenses in top of hood to check rotation of spindle
  • New up-graded PLC Controller
  • Cycle time adjustable from 4 to 10 seconds
  • The C-1203 has the capacity to stack tooling
  • Maximum two cutters per spindle
  • Dust Hood with 5" port
  • Dust Collection Requirement: 1,000 CFM
  • Precision THK rails for guidance of carriage stroke and hold down clamp
  • Side pressure clamp insures proper alignment with fence
  • The C-1203 meets UL & CSA Electrical Standards
  • Machine Can Also Be Outfitted with HSK Tooling, A Touch-Screen, Etc.
  • Can Be Sold Without Electrics for Amish Customers
  • Tooling is Sold Separately

You may also be interested in