New Northtech NT 880HSK Spindle Shaper

Stock #931100N - Available (New)

 

931100N-1.jpg
931100N-1.jpg
931100N-2.jpg
931100N-3.jpg
931100N-4.jpg
931100N-5.jpg
931100N-6.jpg
931100N-7.jpg
931100N-8.jpg
931100N-9.jpg
931100N-10.jpg

  • 3,000 - 13,350RPM, 10HP inverter controlled spindle
  • (1) 1-1/4'' x 4’’ HSK-63F spindle included
  • HSK-63F spindle release system is developed by Andi CNC Machining Centers
  • Spindle tolerance of .0001"
  • Includes sensor light to ensure proper mating of the chucks as well as correct full pneumatic pressure for safety
  • Moveable overarm control panel
  • 35" Ergonomically designed precision milled table
  • Main Motor HP = 10 hp
  • Reverse Motor = Reversible
  • Amp Requirement = 30 Amps
  • 1st Spindle = 1-1/4'' x 4'' Spindle
  • Spindle Diam. = 1-1/4''
  • Under Nut Cap. = 4'
  • Elevation Hp. = 1 Hp.
  • Dual Voltage = 230/460 Volt
  • Dust Collection = (1) 4'' (1) 5'' @ 1117 CFM
  • Recommended CFM = 1/4'' Line @ 90 PSI
  • Fence Dims. = (2) 5-1/2'' x 24''
  • Worktable Dims. = 61'' x 38'' x 35''
  • Fence Dims. = (2) 5-1/2'' x 24''
  • FLR Included = Filter, Lubricator, Regulater

You may also be interested in