New Northtech NT CS-36 Timber Up-Cut Saw

Stock #812700N - Available (New)

 

812700N-1.jpg
812700N-1.jpg
812700N-2.jpg
812700N-3.jpg
812700N-4.jpg
812700N-5.jpg
812700N-6.jpg

  • Motor: 25HP 3PH 230V; (1500 RPM)
  • 36” Carbide tipped blade with 120T included
  • 2” Saw arbor diameter
  • Cycle operation: Pneumatic
  • Table size: 57-3/4” x 34-3/4”
  • Safety interlock on blade door
  • Quick access on front of the machine to adjust stroke
  • 25HP arbor motor
  • Central lubrication system supplies oil to pivot points through central pump
  • Pivot points centrally lubricated with steel flex protected oil lines
  • Delayed safety interlock switch prevents operator from opening blade door while blade is still turning
  • Internal arbor swing pivots with motor ensuring constant power transfer to blade during cycle
  • 3” x 34-1/2” cast iron fence, built to handle large timber cutting
  • (5) Matched V-belt drive delivers full power transfer that is smooth and vibration free
  • (1) 36” Tungsten carbide tipped Kanefusa blade included
  • European style double safety guard enclosure with finger slats
  • (2) 5” bottom dust ports keep dust from accumulating inside blade cavity, requiring 681 CFM @ each point of extraction
  • (2) 5” upper dust ports with adjustable side gate, requiring 681 CFM @ each point of extraction
  • Upper clamp hood can manually be adjusted for quicker and safer cycles
  • Speed of blade cycle is individually controlled on the raise and lower by centrally located control switches
  • 5-Way central control valve ensures reliable pneumatic operation
  • Equipped with air supply relay that prevents blade from cycling when not running, preventing unintentional cycles blade crashes
  • Linear gauge with fast lock knob makes stroke length adjustment quick and easy
  • Centrally located control station beneath table
  • Front mounted Emergency Stop for quick access, shuts electrical power off to blade and immediately terminates air supply returning clamp and blade to home position
  • 13” stroke via double actuation air cylinder ensures excellent part hold before blade cycle
  • Pneumatic foot pedal actuation is capable of 10-15 cycles/minute (Double Palm Button optional)
  • Single pneumatic hook up with quick slide shut off, filter, lubricator and regulator. 8 CFM @ 100 PSI required
  • Arbor lock provides rigid support and added safety during blade change
  • Tool box including all applicable tools, wrenches, as well as operator manual are included

You may also be interested in