Used Omga Optimizing Saw Model T522 6000

Stock #8044 - Available (Cleaned and Checked)

 

8044-1.jpg
8044-1.jpg
8044-2.jpg
8044-3.jpg
8044-4.jpg
8044-7.jpg
8044-8.jpg
8044-5.jpg
8044-6.jpg

  • Omga Model T522 Automatic Cross-Cutting & Defecting Saw, Suitable for Cutting Single or Multiple Stacked Pieces
  • Equipped with a CNC Precision Programmable Pusher & Encoder
  • Up-Stroking 18” Cut-Off Saw for Optimization & Defecting
  • In-Feed Marking Table Complete with Laser-Gun
  • Two-Grade Optimization
  • Feed System w/ Tail Clamp
  • Graphic Display w/ Board Preview Diagram
  • Maximum Width of Cut: 12-5/8”
  • Maximum Thickness of Cut: 4-1/2”
  • Saw Blade Motor: 6 HP
  • Saw Blade RPM: 3,400
  • Maximum Pushing Weight: 90 lbs.
  • Infeed Length: 19.5’
  • Cutting Speed Cycle: Adjustable from 0.2 – 0.8 Second
  • Computer is capable of cutting to length, optimization based on length, defecting, optimization between defects, an optimization between defect w/ selection of two different grades
  • 10.4” Screen
  • Metric or Imperial Measurements
  • Storage Capacity: 500 Lines
  • Production Rate of Approximately 12 – 16 Cycles per Minute
  • Year: 2011
  • Serial #: 7.115

You may also be interested in