LST Tandem lift tables provide level rise for long loads such as lumber, pipes, sheets, bar stock, and assemblies. These hydraulic lift tables are typically used as feeding tables for tube welders, formers, and panel saws as well as for bundling and banding bar stock, lumber and other materials. Tandem design allows the lift table to have a combination of high capacity and low collapsed height to support loads up to 7' x 17'. They are available in extra long and extra wide configurations.
CAPACITY 4,000lb.uniform load
PLATFORM 48"W x144"L
BASE FRAME 24"x96"with lag plates and maintenance device
LOWERED HEIGHT 6-3/4
VERTICAL TRAVEL 36"
RAISED HEIGHT 42-3/4
ELEVATING TIME 42seconds(approx)
LOWERING TIME Adjustable with pressure compensated flow control
POWER UNIT Internally mounted with 1.0 HP TENV electric motor and .85 GPM hydraulic pump, valving, and reservoir filled with oil
PRIMARY VOLTAGE 115/1/60
CONTROL VOLTAGE 115/1/60
CONTROL NEMA 1 foot switch control with safety cover. Includes 10 feet of straight cord
ACTUATION Two 3-1/2" low presure cylinders with chrome plated rod, power up/gravity down
BUSHINGS All pivot points equipped with Teflon lined bushings