New Putsch EBP 420 Edgebander with Pre-Mill

Stock #252001N - Available (New)

 

252001N-1.jpg
252001N-1.jpg

  • Putsch®'s most popular compact edgebander, the EBP 420 offers increased panel workability in a footprint comparable to the EBP 320. The chassis is built to allow for two additional optional processes (edge/radius scraping, glue scraping and/or buffing unit) along with anti-adhesive and/or cleaning spray units. Moving at a speed of 7 meters per minute, the chain feed system has scratch-resistant rubber pads to carry the panel for consistent banding applicable work processes. The easy-to-adjust top bar includes a double row of rubber rollers to secure the panel.
  • The EBP 420 handles banding from .04 to 3 mm thick, and panels up to 45 mm in height. Coils are cut using an oscillatory cutting shear for uninterrupted edge feed. The machine has an automatic single-motor end trim unit with two 80 mm blades. The flush trim unit has 75 mm cutters (with disposable knives) that offer a straight / 2 mm radius / 15° bevel.
  • Feed Speed 7 m/min
  • Panel Thickness 8 mm – 45 mm
  • Edge Thicknesss in Coils and Strips on Panel 0.4 mm - 3 mm
  • Minimum Panel Length (Side Being Processed) 210 mm
  • Minimum Panel Width 95 mm
  • Flush Trimming Motors (Each) 200 Hz - 12000 RPM - 0.37 kW
  • End Trimming Motor 50 Hz - 0.18 kW
  • Compressed Air Operating Pressure 6.5 bar
  • Compressed Air Consumption During Operation 300 NL/min
  • Minimum Air Flow at Dust Extraction Outlets 20 m/s Air Consumption of Dust Extraction System 820 m3/h

You may also be interested in