New Giben Model KG 365 Edgebander

Stock #251000N - Available (New)

 

Giben KG 365J 1.jpg
Giben KG 365J 1.jpg

  • The KG365 has all the features and options you will need to produce volumes of well edged parts. With its premelting glue system for quick and easy glue prep and changeover, and its touch screen controls for simple machine operation, this machine is able to reliably produce quality components all day long.
    Specifications:
  • Touch screen
  • Support bar at 700 mm extractable
  • Chain drag with manual lubrication of the sliding guides
  • Speeds 10-15-20 m/min
  • Feed direction is left to right
  • Maximum panel height 60 mm
  • Maximum edge thickness 3 mm (laminate strips up to 3 mm if fed by hand)
  • Minimum length is 120 mm
  • Minimum width 80 mm
  • Voltage 220 / 480
  • Edge loading and cutting
  • Gluing and pressing area
  • Pre-melt glue station
  • End trim
  • Top and bottom trim
  • Scraping
  • Buffing
    Available options for KG edge banders
  • Strip feeder
  • Flat or profile scraper
  • Diamond tooling (2 or 3 mm)
  • Upgrade premill to 65mm
  • Hot air blowers
  • Additional glue pot (quick melt)
  • Additional glue pot (non quick melt)
  • Reverse feed
  • Transformer

You may also be interested in