New Northtech Model CS-24 Up Cut Saw

Stock #812000N - Available (New)

 

Northtech NT-CS24L.jpg
Northtech NT-CS24L.jpg

  • Main Motor Hp. = 15 Hp.
  • Voltage/ Freq. = 230 Volt 60Hz Phase = 3 Phase
  • Amp Requirement = 32 Amps
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 24 Volt Magnetic Controls
  • Assisted Start = Y Delta
  • Cut Envelope = 2" x 21", 4" x 19", 6" x 15", 8" x 8"
  • Max. Width = 1'' x 22''
  • Max. Thickness = 8'
  • Arbor Rpm = 2100
  • Blade Size = 24'' Tungeston Carbide Tipped
  • No. of Teeth = 100 Tooth
  • Tooth Spacing = 5/8 In.
  • Blade Kerf = .156 In.
  • Dust Collection = (2) 4'' @ 450 CFM
  • Dust Port Out = 4'' Top 4'' Bottom
  • Arbor Diameter = 1'' Arbor
  • Cycles/Minute = 26 Cuts Per Minute
  • Hold Down Style = T Clamp
  • Recommended CFM = 480 nl/min
  • Emergency Stop = Push Button
  • Guarding = Full Gaurd with Clear View Window
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2" x 25'' Machined Steel
  • Adjust. Stroke = 7-3/4'' Adj. on Arbor Stroke
  • Frame Const. = 1/4'' Steel Construction
  • Worktable Dims. = 28-3/4'' x 45''
  • Table Const. = Machined Steel
  • Decible Rating = 68 dB
  • Net Weight = 1285 Lbs.
  • Gross Weight = 1455 Lbs.
  • Machine Dims. = 31-3/4'' x 45'' x 56''
  • Packaging Dims = 36'' x 51'' x 61''
  • OPTIONAL: For additional charge Dual Palm
  • OPTIONAL: For additional charge Safety Interlock Switch
  • Available in Left & Right Hand Configuration

You may also be interested in