New US Concepts Model CHB 8 Hauncher-Notcher

Stock #31100N - Available (New)

 

US Concepts CHB8i-01.jpg
US Concepts CHB8i-01.jpg
US Concepts CHB8i-02.jpg
US Concepts CHB8i-03.jpg

  • Description
  • The heavy duty Hauncher is used to make cuts (notches) along the edge of the board. The horizontal spindle moves hydraulically past the tables with the clamped board. A back up board in the table and climb cut assure the clean cut, even on cross grain. Material air clamps and spindles motion are actuated by a foot switch. Adjustable back fence sets the depth of cut.
  • Specifications
  • Motor: 7.5 Hp
  • Cutting Width: 8"
  • Max. Cutter Diameter: 8"
  • Max. Material Height: 4"
  • Spindle Feed Speed Air/Oil: 0 to 25 FPM
  • Table Size: 36" x 16"
  • Cutter Speed: 4300 or 6200 RPM
  • Spindle Diameter: 40mm
  • Net Weight: 1540 lb.
  • Max. Cutting Depth: 2"
  • Dust Outlet Diameter: 6"
  • Number of Clamps: 2
  • Standard Equipment
  • Automatic starter and motor overload protection
  • Variable speed for feed
  • Cutting depth adjustment
  • Heavy-duty frame
  • Cutter guard
  • Guarded foot switch for cycle activation
  • Side stop
  • 208-230/460-volt, 3-phase, 60Hz
  • Electrical equipment according to UL/CSA
  • Options
  • 10 Hp motor
  • Additional Clamp
  • 1-1/2" spindle
  • 1-13/16" spindle
  • Safety dual palm circuit instead of foot switch
  • Center fence mounted to the table
  • 575-volt or 380-volt electric
  • Crating for shipment
  • Crating for export as per ISPM-15
  • Note: tooling and spacers are not included.

You may also be interested in