New Italpresse Model SP/1-A Automatic Through Feed Case Clamp

Stock #15300N - Available (New)

 

SP 1-A Through Feed Case Clamp.jpg
SP 1-A Through Feed Case Clamp.jpg

  • Maximum working depth: .700 mm (27.6“)
  • Minimum working depth: 250 mm (9.8”)
  • Maximum working length: 2,500 mm (98”)
  • Minimum working length: 300 mm (11.8”)
  • Maximum working height: 1,220 mm (48”)
  • Minimum working height: 300 mm. (11.8”)
  • Maximum through-feed clearance: 750 mm (29.5”)
  • Air consumption @ 6 bar pressure: 100 liters/cycle (3.53 cu. ft./cycle)
  • Total loading belt length: 5,500 mm (18’)
  • Loading belt drive power: 0.5 hp.
  • Maximum loading belt speed: 30 m/min (92 fpm)
  • Automatic loading and unloading of cabinet boxes by inverter controlled motorized conveyor belt
  • Electronic reading of cabinet dimensions with full automatic adjustment of the vertical and horizontal clamping beams
  • Pneumatic activated clamping action with adjustable control of the clamping speed and pressure
  • Two torsion bars controlled by four heavy-duty toothed belts maintain the parallelism of the top platen during movement and clamping
  • The side clamping bars at the out-feed end are installed on the fixed frame of the machine to assure perfect squaring of the cabinet during the clamping cycle
  • Three operation modes – manual, semi-automatic (requires the operator to press a foot pedal to initiate loading / unloading after the automatic clamping cycle is complete), and automatic (automatic loading / unloading without input from the operator)
  • Automatic cycle timer
  • Adjustable pressure controls
  • Safety light barrier on the front side and fixed safety screens on the rear side
  • 480 volts / 3 phase / 60 hz
  • UL approved electrical components

You may also be interested in