Used SCM Model Concept 1000D w/ Two 24 Pos HSK Tool Changer

Stock #10040 - Sold (Cleaned and Checked)

 

10040-01.JPG
10040-01.JPG
10040-02.JPG
10040-03.JPG
10040-04.JPG
10040-05.JPG
10040-06.JPG
10040-07.JPG
10040-08.JPG
10040-09.JPG
10040-10.JPG
10040-11.JPG
10040-12.JPG
10040-13.JPG
10040-14.JPG
10040-15.JPG
10040-16.JPG
10040-17.JPG
10040-18.JPG
10040-19.JPG
10040-20.JPG
10040-21.JPG
10040-22.JPG
10040-23.JPG
10040-24.JPG
10040-25.JPG
10040-26.JPG
10040-27.JPG
10040-28.JPG
10040-29.JPG
10040-30.JPG
10040-31.JPG
10040-32.JPG
10040-33.JPG
10040-34.JPG
10040-35.JPG
10040-36.JPG
10040-37.JPG
10040-38.JPG
10040-39.JPG
10040-40.JPG
10040-41.JPG
10040-42.JPG
10040-43.JPG
10040-44.JPG
10040-45.JPG
10040-46.JPG
10040-47.JPG
10040-48.JPG
10040-49.JPG

  • Opening of mobile beam 39"
  • Stroke of right supplementary fence 70"
  • Minimum working width 4.69"
  • Maximum workpiece thickness 7.08"
  • Maximum clearance between chain and column 7.87"
  • Height of worktable from floor 37"
  • Feed speed 10-60 ft/min
  • Padded chains with pop-up dogs 15.7" apart
  • First Station fast jump cope head Electro-spindle with HSK 63F chuck. 1000 min to 12000 max rpm through static inverter. Motor 11HP at 6000 rpm and 15HP max at 12000 rpm. Equipped with 24 station tool changers
  • Second Station Cope Head Electro-spindle with HSK 63F chuck. 1000 min to 12000 max rpm through static inverter. Motor 11HP at 6000 rpm and 15HP max at 12000 rpm. Equipped with 24 station tool changers
  • Third Station Sanding Spindle Head Electro-spindle with HSK 63F chuck. 1000 min to 12000 max rpm through static inverter. Motor 11HP at 6000 rpm and 15HP max at 12000 rpm. Equipped with 24 station tool changers
  • Fourth Station Sanding Spindle Head Electro-spindle with HSK 63F chuck. 1000 min to 12000 max rpm through static inverter. Motor 11HP at 6000 rpm and 15HP max at 12000 rpm. Equipped with 24 station tool changers
  • CONTROL 100 PC ONE CONTROL Electronic control unit with personal computer
  • The following Axis are controlled through PC
  • -- Vertical positioning of pressure beam
  • -- Opening and closing
  • -- Horizontal position of infeed fend with reference to trim saw
  • -- Station #1 Horizontal and Vertical position of jump cope
  • -- Station #2 Horizontal and Vertical position of cope
  • -- Station #3 Horizontal and vertical positioning of sander
  • -- Station #4 Horizontal and vertical positioning of sander
  • Automatic return belt conveyor capable to return rail/stiles as well as raised panel or complete doors
  • Serial no. AA1/013992
  • NEW IN 2004
  • Complete detailed Manufacturers specifications available

You may also be interested in