Used Topmaster Model N 3000 T Moulding Inserter

Stock #25100 - Available (Cleaned and Checked)

 

25100.jpg
25100.jpg
25100a.jpg
25100b.jpg
25100c.jpg
25100d.jpg
25100e.jpg
25100f.jpg
25100g.jpg
25100h.jpg
25100i.jpg
25100j.jpg
25100k.jpg
25100l.jpg
25100m.jpg
25100n.jpg
25100o.jpg

  • Automatically shapes, grooves, and T-bands in one operation
  • Production rates of 30 to 50 pieces per hour with one operator are average
  • 10 HP 14,400 RPM shaping head
  • Grooving head with approximately 3 HP Porter Cable router turning approximately 22,000 RPM
  • Banding head inserts T-moulding into slot with automatic corner notching (when T-moulding is being applied around a tight radius) and automatic T-mold cut-off
  • Sizing template is utilized for each shape of work piece
  • Pneumatic clamping of work piece
  • 3 HP DC motor coupled with a high torque reduction gear box controls turntable speed
  • Operator can increase or decrease speed and direction as needed
  • Handles T-moulding from 1/2" to 1-3/4" wide and 1/16" to 5/16" thick
  • Min. square or circle - 14"
  • Max. circle or square - 76"
  • Max. rectangle - 48" x 96"
  • Max. blank size (diagonal) - 108"
  • 1/2" min. to 1-1/2" max. material thickness
  • Max. width to length ratio 1:6.8 (1:4 for panels up to 67" long)
  • Min. corner radius - 3/16"

You may also be interested in