Used L & L Machinery Model DA-80

Stock #1361 - Sold (Reconditioned)

 

1361.JPG
1361.JPG
1361a.JPG
1361b.JPG
1361c.JPG
1361d.JPG
1361e.JPG
1361f.JPG
1361g.JPG
1361h.JPG
1361i.JPG

  • Clamping Area: 54� x 83�
  • Curing Area: 50� x 80� x 2� thick
  • Generator: Built in 10 kW Radio Frequency Generator will cure approximately 1,000 square inches of glue line per minute
  • Hydraulic Pump Unit: Powered by a 5 HP Electric motor
  • Side Pressure: Applied by 11 each 2� bore by 4� stroke hydraulic cylinders
  • End Pressure: Applied by 7 each 2� bore by 4� stroke hydraulic cylinders
  • High / Low Pressure: The system is equipped with a low pressure pre-clamp system to allow the operator to clamp the parts under low pressure prior to closing the press. Once the press is closed, full laminating pressure is applied automatically
  • Controls: Upgraded to PLC control system with operator interface. Features programmable cure time and dwell time as well as system diagnostics
  • Hydraulic Pump Unit: Powered by a 5 HP Electric motor
  • All Hydraulic cylinders were rebuilt with new seals and rod bearings
  • All Hydraulic hoses were replaced

You may also be interested in