New Giben Model G4 EVO 49 3-axis Flat Table CNC Router

Stock #571000N - Available (New)

 

G4 EVO.jpeg
G4 EVO.jpeg

  • Two pop up pins with a stroke of 60 mm & side pop up rail
  • Feed Rate:
    X Axis ~ 80 m/min
    Y Axis ~ 80 m/min
    Z Axis ~ 30 m/min
  • One 18 Hp ANDI HSK-63F air cooled spindle 1,000 – 24,000 RPM
  • Eight tool carousel with indexing system
  • 5 x 5 vertical drilling
  • SYNTEC CNC Controller with remote hand wheel
  • One 10 Hp Becker vacuum pump
  • Touch off function fixed on the table
  • 8 tool holders and 16 collets
  • Safety fencing and photocell barrier across the front
  • Auto lubrication
  • Helical rack direct drive ~ not belt driven
  • Push off device
  • Non-nesting lines are pre-wired to accept load and off-loading conveyor table, either labeling system, sweeper & vacuum pad loading device.
  • Tooling package
  • 208-240-480 volt / 3 ph / 60 Hz
    Available Options
  • Upgrade to 12 tool carousel
  • Upgrade to 10 x 7 vertical drilling
  • 3 speed drill (2,800, 4,800 & 6,000)
  • Four suction zones
  • 2nd vacuum pump (with “H” frame)
  • Offloading conveyor table (48)
  • Offloading conveyor table (510 & 512)
  • Manual labeling
  • Auto labeling (49)
  • Auto labeling (510 & 512)
  • Nesting line for 49 model
  • Nesting line for 510 or 512 model
  • Reverse feed

You may also be interested in