Used Heesemann Model LSM-8 Wide Belt Sander

Stock #7168 - Available (As Is)

 

7168i-04.JPG
7168i-04.JPG
7168i-05.JPG
7168i-06.JPG
7168i-07.JPG
7168i-09.JPG
7168i-11.JPG
7168i-12.JPG
7168i-13.JPG
7168i-15.JPG
7168i-16.JPG
7168i-18.JPG
7168i-20.JPG
7168i-22.JPG
7168i-24.JPG
7168i-25.JPG
7168i-26.JPG
7168i-27.JPG
7168i-28.JPG
7168i-29.JPG
7168i-30.JPG
7168i-32.JPG
7168i-33.JPG
7168i-34.JPG
7168i-35.JPG
7168i-36.JPG
7168i-37.JPG
7168i-40.JPG
7168i-43.JPG
7168i-44.JPG
7168i-45.JPG
7168i-46.JPG

  • With Heesemann's LSM-8 sanders designed for heavy 2 to 3 shift operations, this sander is ideal for whitewood sanding of veneered panels and panels coated with various sealers. The cross belt removes tape, cuts short fibers that contribute to grain rising, and sands panels with "book-matched" veneer. The last sanding unit is equipped with an internal pressure segment belt for an extra smooth finish
  • Enhanced 16 mm control roller spacing with 3 rollers per segmented pad
  • CSD® segmented pad system is equipped on all 3 sanding units
  • Pneumatic conveyor belt cleaning
  • Infeed extension with non-driven rollers
  • Electronic variable feed speed 5 to 25 mpm (16-82 fpm)
  • Vacuum table – only Heesemann builds it into the frame for superior hold down!
  • Industrial PC controller, Windows® Operating System
  • Width Capacity 53"
  • Work-piece thickness 3 mm to 140 mm (1/8" to 5.5")
  • Unit 1: Cross Belt Sanding Unit 2 speed motor - 19/24 kW (26/33 Hp) Abrasive belt speed 12/24 mps (39/78 fps), Cross Belt (Cloth) 4800 x 150 mm (189" x 6")
  • Unit 2: Combination Longitudinal Sanding Unit Front retractable roller for light calibrating and segmented pad system for fine sanding Bi-directional sanding, Door-in-Door viewing, 2 speed motor - 31/37 Hp, abrasive belt speed 10/20 mps (33/65 fps)
  • Unit 3: Longitudinal Sanding Unit Internal pressure segment belt for finer sanding Inner chevron belt Inverter driven motor 26 kW (34 Hp), abrasive belt speed 0.5-16 mps (1.6-52 fps)
  • Longitudinal Belt 2620 x 1350 mm (103" x 53")
  • Unit 4: Panel Cleaning Brush, Fiber trimming
  • Unit5: Fleece Finishing Brush with Frequency control motor
  • 480v, 3ph
  • Year: 2008!
  • Serial #: 2008.05.311

You may also be interested in